transistors 1 publication date: november 2002 sjc00225ced 2SD1511 silicon npn epitaxial planar type darlington for low-frequency output amplification features ? forward current transfer ratio h fe is designed high, which is appro- priate to the driver circuit of motors and printer hammer: h fe = 4 000 to 20 000. ? a shunt resistor is omitted from the driver. ? mini power type package, allowing downsizing of the equipment and automatic insertion through the tape packing and the maga- zine packing. absolute maximum ratings t a = 25 c electrical characteristics t a = 25 c 3 c 4.5 0.1 3.0 0.15 45? 2.6 0.1 0.4 max. 1.6 0.2 1.5 0.1 4.0 2.5 0.1 3? +0.25 ?.20 1.0 +0.1 ?.2 0.5 0.08 0.4 0.04 0.4 0.08 12 3 1.5 0.1 3? unit: mm note) 1. measuring methods are based on japanese industrial standard jis c 7030 measuring methods for transistors. 2. * 1: pulse measurement * 2: rank classification rank q r s h fe 4 000 to 10 000 8 000 to 20 000 16 000 to 40 000 parameter symbol rating unit collector-base voltage (emitter open) v cbo 100 v collector-emitter voltage (base open) v ceo 80 v emitter-base voltage (collector open) v ebo 5v collector current i c 1a peak collector current i cp 1.5 a collector power dissipation * p c 1w junction temperature t j 150 c storage temperature t stg ? 55 to + 150 c parameter symbol conditions min typ max unit collector-base voltage (emitter open) v cbo i c = 100 a, i e = 0 100 v collector-emitter voltage (base open) v ceo i c = 1 ma, i b = 080v emitter-base voltage (collector open) v ebo i e = 100 a, i c = 05 v collector-base cutoff current (emitter open) i cbo v cb = 25 v, i e = 0 100 na emitter-base cutoff current (collector open) i ebo v eb = 4 v, i c = 0 100 na forward current transfer ratio * 1, 2 h fe v ce = 10 v, i c = 1 a 4 000 40 000 ? collector-emitter saturation voltage * 1 v ce(sat) i c = 1 a, i b = 1 ma 1.8 v base-emitter saturation voltage * 1 v be(sat) i c = 1 a, i b = 1 ma 2.2 v transition frequency f t v cb = 10 v, i e = ? 50 ma, f = 200 mhz 150 mhz b c e 200 ? 1: base 2: collector 3: emitter minip3-f1 package marking symbol: p internal connection note) * : printed circuit board: copper foil area of 1 cm 2 or more, and the board thickness of 1.7 mm for the collector portion
2SD1511 2 sjc00225ced v be(sat) ? i c h fe ? i c c ob ? v cb p c ? t a i c ? v ce v ce(sat) ? i c 0 200 160 40 120 80 0 1.2 1.0 0.8 0.6 0.4 0.2 copper plate at the collector is more than 1 cm 2 in area, 1.7 mm in thickness collector power dissipation p c ( w ) ambient temperature t a ( c ) 010 8 26 4 0 2.4 2.0 1.6 1.2 0.8 0.4 t a = 25 c i b = 200 a 40 a 60 a 80 a 180 a 160 a 140 a 120 a 100 a collector current i c ( a ) collector-emitter voltage v ce ( v ) 0.01 0.1 1 10 0.01 0.1 1 10 100 i c / i b = 1 000 25 c 75 c t a = ? 25 c collector-emitter saturation voltage v ce(sat) ( v ) collector current i c ( a ) 0.01 0.1 1 10 0.01 0.1 1 10 100 i c / i b = 1 000 t a = ? 25 c 25 c 75 c base-emitter saturation voltage v be(sat) ( v ) collector current i c ( a ) 0.01 0.1 1 10 10 100 1 000 10 000 100 000 v ce = 10 v t a = 75 c 25 c ? 25 c forward current transfer ratio h fe collector current i c ( a ) 1 10 100 0 30 25 20 15 10 5 i e = 0 f = 1 mhz t a = 25 c collector-base voltage v cb ( v ) collector output capacitance (common base, input open circuited) c ob (pf)
request for your special attention and precautions in using the technical information and semiconductors described in this material (1) an export permit needs to be obtained from the competent authorities of the japanese government if any of the products or technologies described in this material and controlled under the "foreign exchange and foreign trade law" is to be exported or taken out of japan. (2) the technical information described in this material is limited to showing representative characteris- tics and applied circuits examples of the products. it neither warrants non-infringement of intellec- tual property right or any other rights owned by our company or a third party, nor grants any license. (3) we are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) the products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instru- ments and household appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (5) the products and product specifications described in this material are subject to change without notice for modification and/or improvement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifications satisfy your requirements. (6) when designing your equipment, comply with the guaranteed values, in particular those of maxi- mum rating, the range of operating power supply voltage, and heat radiation characteristics. other- wise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) when using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) this material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of matsushita electric industrial co., ltd. 2002 jul
|
